Garrett - MT 5500 Walk Thru Metal Detector at Security Imaging.com



	Security Imaging, your source for Photo Id Equipment & Supplies. Call Toll Free 1-877-369-7033 or Fax 206-527-4918 Local 206-527-8819

Garrett - MT 5500 Walk Thru Metal Detector

Part #: JA-202

The MT 5500 is one of the worlds most popular walk-though metal detectors because it provides maximum throughput with unparalleled Multi-Dimensional scanning. The MT 5500 meets the demanding needs of security professionals worldwide who trust its ability to maintain a high flow rate with minimal alarms.

$4,057.00

Qty

Additional Information

Easy Assembly
Garretts MT 5500 is easily assembled with only 4 pieces and 8 screws and simple to follow instructions.
Multi-Dimensional Scanning
The MT 5500 uses Multi-Dimensional scanning which ensures maximum throughput and uniform screening with a minimum of false alarms. Multiple coil circuitry with dual alarm lights inform operators on which side of the detector the target is located. With hot spots eliminated, the unit's detection field is uniform throughout the archway and false alarms are significantly minimized.
Microprocessor Controlled
State of the art microprocessors ensure sensitivity and flexibility of programming with a maximum of 200 distinct sensitivity levels in each program.
Audible and Visual Alarms
Audible alarm with 3 distinct tones indicating target on the left, right or center of the archway; two LED bar graphs related to the red Alarm Lights that report detectable metal on either side of the unit or centered within it.
Detection Field
Unique coil design offers multidimensional detection field with total uniformity both horizontally and vertically. This design, plus a choice of three levels of ankle level boost, eliminates traditional hot spots and weak signals. Target detection is precise regardless of its location in the archway.

Access Control Panel
The Access Control Panel is designed for use by authorized personnel with specific security codes. It allows authorized users to change settings such as Program and Sensitivity. Security of the detectors settings is maintained with a non-resettable sequence code, which indicates every attempt at access to the settings. A tamper alarm sounds within 10 seconds after the Access touch pad is pressed unless a proper access code is entered.

The MT 5500 includes 20 standard programs, which are maintained in an electrically erasable nonvolatile memory, for the ultimate in security application versatility. The unit maintains all settings even when disconnected from power and does not require recalibration when unit is turned OFF and back ON. No battery is required for memory retention. When the unit is in operation, a self-test of all systems is performed continuously with any failures or problems reported on the LCD display.

Limited 24 months, parts and labor

Security Imaging Corporation Seattle, WA


				13716 32nd Ave NE #123, Seattle, WA 98125 Open Monday - Friday, 7am - 4pm PST Toll Free 877-369-7033, Local 206-527-8819, Fax 206-527-4918 Click Here for our Fax Order Form	› FAQ › SITE MAP › TERMS › PRIVACY

Site by Montana Banana